Agru Australia

ES 651-661-721

General Data

	ES 651	ES 652	ES 661	ES 662	ES 721	ES 722	ES 72T	ES 73T
Output (wire 5mm) Output (wire 4mm) Output (wire 3mm) Output (granule)	----- 2,5 kg/h 1,4 kg/h -----	----- 2,5 kg/h 1,4 kg/h -----	3,9 kg/h 2,5 kg/h ----- -----	3,9 kg/h 2,5 kg/h ----- -----	6,0 kg/h 3,8 kg/h ----- -----	6,0 kg/h 3,8 kg/h ----- -----	6,0 kg/h 3,8 kg/h ----- -----	----- ----- ----- 2 - 6,2 kg/h
Materials	PP, PE	PP, PE	PP, PE	PP, PE	PP, PE	PP, PE	PP, PE	PP, PE
Weight	6 kg	5 kg	8 kg	7,9 kg	9,4 kg	8,9 kg	10,4 kg	12,3 kg
Length	470 mm	470 mm	570 mm	570 mm	700 mm	700 mm	790 mm	890 mm
Electronic Speed Control	Yes	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Drive with external electronic (??)	Yes	Yes	Yes	Yes	Yes	Yes	Yes	No
Cartridge heater	400 W	400 W	650 W	650 W	800 W	800 W	800 W	800 W
Hot air blower	2200 W	2000 W	2200 W	2000 W	2200 W	2000 W	2200 W	2200 W
Voltage	230V & 120V	230V & 120V	230V & 120V	230V & 120V	230V & 120V	230V & 120V	230V & 120V	230V & 120V
Integrated air supply	No	Yes	No	Yes	Yes	No	Yes	No
External air supply	No	Yes	No	Yes	No	Yes	No	No

Description

NEW Hand extruders with brushless drive.
• Dramatic increase in service life compared with conventional drill drives
• Constant drive torque ensures uniform extruded output, irrespective of variation in drive loads
• Greatly reduced noise generation compared with conventional motors
• Flanged connection between brushless drive motor and extruders avoids misalignment between drive shaft and extruder screw; excessive bearing stresses are ruled out
• Lower weight and shorter length than conventional hand extruders
• Motor start interlock ensures that drive only starts when pre set temperature is reached
• Temperature sensors for preheat temperature and extruded are protected vs. mechanical damages.

For more information on this range, contact us.